List of models
SW Family – Includes pretreatment and RO modules
Note: Requests for systems with capacity between 2,200 m³/day and 4,000 m³/day can be met with 2 systems of the SW-M series.
- Remineralization modules – available for all series
- Second pass module (H) – available for all series
- Independent RO modules from each series
- Redundancy configuration (multiple systems)
- Backup PLC
- Skid mounted, Containerized
Utilizing Available Coldness from Liquefied Natural Gas LNG Regasification Process for Seawater Desalination
In this article a case study was considered, in which an LNG regasification plant can supply 1750 ton/hr of water-glycol solution at -15°C to be utilized for seawater desalination. The main challenge in this evaluation is being able to provide a desalination solution able to compete with the commonly used RO plants.
Recovery of Osmotic Power in SWRO Plants
The paper analyzes the ways that different researchers have selected to overcome the phenomenon of CP, and presents an overview of the existing RO membranes from the point of view of their suitability for use in Forward Osmosis power generation.
Design Challenges and Operational Experience of a Mega MED Seawater Desalination Plant in Tianjin
This article is a continuation of the article "Sliding Pressure Turbine Integrated with Seawater Desalination Facility (MED)" presented at the IDA 2011 World Congress.
Three Pressure Retarded Osmosis PRO Processes
Pressure retarded osmosis (PRO) can be implemented on a number of water types, using different technologies and achieving various power outcomes. This paper presents the three most practical options.
Steam Driven Large Multi Effect MVC (SD MVC) Desalination Process for Lower Energy Consumption and Desalination Costs
This paper will also describe the thermodynamic advantages, the specific investment and desalination costs comparison, and the resulting desalination cost reduction potential of the steam-driven multi effect MVC process.
Three Center Design Implemented in Ashkelon SWRO Plant
This paper presents the three center design implemented in the South Israel (Ashkelon) seawater reverse osmosis (SWRO) desalination facility with guaranteed production capability of 100 Mm3 /year. The facility design is based on the concept of a Three-Center Design: a pumping center, a membrane center and an energy recovery center.